Sep 7th 2023 Thermaltake Reveals Matcha Green Lineup: Ceres 300 TG ARGB Mid Tower Chassis & ARGENT E700 Real Leather Gaming Chair (8) I am notorious for losing little screws, but it appears that Phanteks thought of this and with the case you get a bunch of spares. The GPU mounting kit is out of the way and study, I dont need it personally but for those with large cards its almost a must! There are so many configuration options with this case. Want your bottom fans to lay flat instead of an angle? You can change that. Se cerchi il case per il tuo nuovo setup, ed hai un budget abbastanza alto, questa é la scelta migliore che tu possa fare.

the lights on the case are easily controlled and look seamless, the only issue I have with the case is that with the cable management and HDD ports, its tough to get a chain from your PSU to the slots allotted for HDDs. SSDs are fine and NVmE's are obviously fine, so if you don't have a HDD then this point is moot. I am just an old man apparently. lol I have to say, for such a long and untraditional airflow path, the NV7’s thermal performance was excellent. As mentioned in the acoustic test, we mounted one fan on the side and another in the rear. Our fan setup was not ideal for a case this large, but given that the airflow direction is L-shaped, the thermal performance is surprisingly good and has a ton of potential if you add more fans. Bottom LineJun 2nd 2023 Alphacool Presents Apex Stealth Metal Fans, Skeleton PC Case, and Water Cooling Solutions (31)

No way to control the onboard RGB lights via software.. limited to what onboard options there are. (Doesn't personally bother me but I did want to point that out)

Features

One area where the design feels a bit lazy is on the rear side panel, which needs to be screwed in from the top of the case with a tiny screw. The screw is so small that I can easily see it being lost during the building process, so you’ll want to keep a keen eye on it in case it rolls. NOTA🎖️: Phanteks ha fatto veramente centro con questo case, un design unico non solo dal punto di vista estetico ma anche del retro invisibile del case, ci sono buchi ovunque per far passare cavi da qualsiasi parte il kit di montaggio é unico, ho avuto una facilitá disarmante ad assemblare questo PC. Too complicated to take panels off. You need to remove the top one first, the side glass panel, THEN the front panel... They're connected with screws and you'll need to whip out the good ol screwdriver every time you need to go in to adjust anything.. (coming from an old o11 case this isn't ideal) Our test setup focuses on four components small enough to fit into every chassis format. This allows us to compare the impact case size and cooling have on a modern system. Each of the four measured components is connected to a REED Instruments SD-947 Data Logging Thermometer with K-Type sensors that have been placed as closely as possible to the benchmarked areas of the CPU, GPU, M.2 SSD, and motherboard chipset. A fifth sensor is used to monitor the room temperature for an accurate delta T result. While the data provides us an accuracy of one decimal point, it is still dependent on human placement of the sensor as well as small variance in things like automatic disk activity in windows for example. The systems is air-gapped, so that no automatic software updates can trigger an unwanted workload on any of the components. If you're wanting to get the Lian LI o11 Dynamic look but don't want that case because it's overused, then this case is for you. It's much more spacious and works really well if you have a monster card like the 4090.