FriendlyElec Nanopi R4S Mini Portable Travel Router OpenWRT with Dual-Gbps Ethernet Ports 4GB LPDDR4 Based in RK3399 Soc for IOT NAS Smart Home Gateway

£379.995
FREE Shipping

FriendlyElec Nanopi R4S Mini Portable Travel Router OpenWRT with Dual-Gbps Ethernet Ports 4GB LPDDR4 Based in RK3399 Soc for IOT NAS Smart Home Gateway

FriendlyElec Nanopi R4S Mini Portable Travel Router OpenWRT with Dual-Gbps Ethernet Ports 4GB LPDDR4 Based in RK3399 Soc for IOT NAS Smart Home Gateway

RRP: £759.99
Price: £379.995
£379.995 FREE Shipping

In stock

We accept the following payment methods

Description

It doesn't state that the act of observing something might change it - that is the (completely classical) observer effect. The way I usually create a Yocto BSP layers for those SBCs is that I use parts of the Armbian build tool and integrate them in bitbake recipes and then add them in a layer.

The Standard version doesn't have a MAC-address built-in EEPROM chip while the Enterprise version does. I’ve also tried several TCP window sizes, but usually the default size is the one that you should focus. The NanoPi R4S Enterprise version has a globally unique MAC address which is by default allocated to the CPU's internal Ethernet (rtl8211e) and the name of the device is eth0. Today I’ve done more thorough tests and it seems that there’s no real benefit in a benchmark environment by using those network optimizations.output (despite warnings on the FriendlyArm FAQ about what kind of supply to use – the Blitzwolf was the only thing I had handy with lots of power output. Note: The contents of this section are based on firmware released after 2021/08/31, kernel version kernel 5.

To remove the ISP box, I need WAN side VLAN tagged packets, kind of DHCP specific config, 6to4 tunnelling for ipv4 traffic, etc, the r4s will handle that on wan side. In an ideal world… Wouldn’t some future chipset carry video over USB C alt mode, so that ‘headless’ boxes didn’t need to waste space on a display output? Insert the SD card into your computer, go to the SD card's OS-related directory, and edit the file parameter. Armbian images for NaniPi M4 V2 might work out of the box (most probably same LPDDR DRAM initialization). In our test when assembled with this metal case the NanoPi R4S could run smoothly without frequency reduction.I've done a lot of tweaking of my current OpenWRT setup with VLANs and Firewall stuff, so I am looking for something that (a) can have OpenWRT installed easily (so that I can import my settings), (b) will be relatively future-proof in terms of being able to upgrade to all future OpenWRT versions, (c) is relatively low power usage, and (d) doesn't fail!

I'm ashamed to admit that I was lazy this time, just used their FriendlyWRT build and then debloated. By the way I strongly suggest to follow Thomas around wherever he leaves comments like on cnx-software.New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . To assemble the board inside the case, you will first put the thermal pad on top of the CPU and position it carefully inside the case. It's pretty powerful if the config doesn't have to be represented by a usual tree structure and there's a standard way to link between configuration objects.

As you can see from the above benchmarks the Nanopi-R4S can max the GbE speed of my setup in the bridged mode. I can see the power LED (red) is on, and the status LED (green) is blinking, but the LAN and WAN LEDs are off. The noticeable difference between competitor boards, especially cheaper ones, is that the second interface is connected internally via PCIe and not via USB. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. I believe the increased consumption is due to the fact that the docker daemon runs in the background (OpenWRT) and uses 20-30% of the CPU at idle.I’ve actually seen significant difference by moving the IRQs and the RPS to CPU4 for eth0 and CPU5 for eth, which are the 1. FriendlyELEC has launched a single-board computer designed for headless applications with better specifications than its predecessor NanoPi R2S. After you have made some changes, compiling again with the parameter -O will generate ota-update-XXXXXXXX. The R4S Enterprise version has a built-in EEPROM chip (Model: 24AA025E48T) which has a globally unique MAC address.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop